Detail Collet Handle
These begin shipping June 16.
The AH Detail Collet Handle makes finial turning so sweet! It is precision machined from aluminum and finished with a soft outer grip. It comes with a 1/2” collet as well as 1/4” and 3/8” collet reducers - unlike other collet handles, you do not need to entirely remove the nut to change tool sizes. The collet reducers can be stored inside the handle while they’re not being used. The collets and collet reducers are made from aluminum so that they are easily tightened by hand. And when you do need to get the collet extra tight, the AH Angle Wrench can do the job. At just six inches long, 1 1/4” diameter, and weighing only 7 ounces, it is perfectly suited to fine detail spindle work where the handle needs to easily swing in front of the body. It can also choke up onto a tool, allowing the turner to be even closer to fine detail work.
This is the handle I have been dreaming of while I have been turning thousands of finials over the years. I have designed it to be the easiest, most comfortable, and easy tool change handle for detailed spindle work. I recommend the AH 1/4” 10V detail spindle gouge, the AH 1/2” Push Cut Bowl Gouge and the AH 10V Vortex tool (unhandled) with this handle. Those are the three tools that I use when turning finials.
As always, completely USA made.
Here are the specs on the Detail Collet Handle:
-Precision machined from aluminum
-Soft outer grip
-1/2” DA100 Collet
-1/4” and 3/8” Collet Reducers make it fast and easy to change tools of different sizes
-Works with AH Angle Wrench
-Hex shape does not roll
-6 inches long,1 1/4 inches in diameter
-Weighs only 7 oz.
-Storage inside handle for collet reducers when not in use
I have been selling woodturning tools consistently since I began teaching in 2011. My business is home grown and self funded. I only sell the tools that I believe to be the very best for my students and customers and I stand behind my products 100%.
These begin shipping June 16.
The AH Detail Collet Handle makes finial turning so sweet! It is precision machined from aluminum and finished with a soft outer grip. It comes with a 1/2” collet as well as 1/4” and 3/8” collet reducers - unlike other collet handles, you do not need to entirely remove the nut to change tool sizes. The collet reducers can be stored inside the handle while they’re not being used. The collets and collet reducers are made from aluminum so that they are easily tightened by hand. And when you do need to get the collet extra tight, the AH Angle Wrench can do the job. At just six inches long, 1 1/4” diameter, and weighing only 7 ounces, it is perfectly suited to fine detail spindle work where the handle needs to easily swing in front of the body. It can also choke up onto a tool, allowing the turner to be even closer to fine detail work.
This is the handle I have been dreaming of while I have been turning thousands of finials over the years. I have designed it to be the easiest, most comfortable, and easy tool change handle for detailed spindle work. I recommend the AH 1/4” 10V detail spindle gouge, the AH 1/2” Push Cut Bowl Gouge and the AH 10V Vortex tool (unhandled) with this handle. Those are the three tools that I use when turning finials.
As always, completely USA made.
Here are the specs on the Detail Collet Handle:
-Precision machined from aluminum
-Soft outer grip
-1/2” DA100 Collet
-1/4” and 3/8” Collet Reducers make it fast and easy to change tools of different sizes
-Works with AH Angle Wrench
-Hex shape does not roll
-6 inches long,1 1/4 inches in diameter
-Weighs only 7 oz.
-Storage inside handle for collet reducers when not in use
I have been selling woodturning tools consistently since I began teaching in 2011. My business is home grown and self funded. I only sell the tools that I believe to be the very best for my students and customers and I stand behind my products 100%.
These begin shipping June 16.
The AH Detail Collet Handle makes finial turning so sweet! It is precision machined from aluminum and finished with a soft outer grip. It comes with a 1/2” collet as well as 1/4” and 3/8” collet reducers - unlike other collet handles, you do not need to entirely remove the nut to change tool sizes. The collet reducers can be stored inside the handle while they’re not being used. The collets and collet reducers are made from aluminum so that they are easily tightened by hand. And when you do need to get the collet extra tight, the AH Angle Wrench can do the job. At just six inches long, 1 1/4” diameter, and weighing only 7 ounces, it is perfectly suited to fine detail spindle work where the handle needs to easily swing in front of the body. It can also choke up onto a tool, allowing the turner to be even closer to fine detail work.
This is the handle I have been dreaming of while I have been turning thousands of finials over the years. I have designed it to be the easiest, most comfortable, and easy tool change handle for detailed spindle work. I recommend the AH 1/4” 10V detail spindle gouge, the AH 1/2” Push Cut Bowl Gouge and the AH 10V Vortex tool (unhandled) with this handle. Those are the three tools that I use when turning finials.
As always, completely USA made.
Here are the specs on the Detail Collet Handle:
-Precision machined from aluminum
-Soft outer grip
-1/2” DA100 Collet
-1/4” and 3/8” Collet Reducers make it fast and easy to change tools of different sizes
-Works with AH Angle Wrench
-Hex shape does not roll
-6 inches long,1 1/4 inches in diameter
-Weighs only 7 oz.
-Storage inside handle for collet reducers when not in use
I have been selling woodturning tools consistently since I began teaching in 2011. My business is home grown and self funded. I only sell the tools that I believe to be the very best for my students and customers and I stand behind my products 100%.